Compact Electric Cylinders
DR Series
- A Compact Structure That Integrates a Ball Screw and Stepper Motor
- Equipped with Closed Loop Stepper Motor
- Stroke 25/30 mm, Frame Size 20/28 mm
- Ultra-High Precision Positioning
Features | Compact electric cylinder DR Series
Key Features
Integrated Structure of αSTEP and Ball Screw
Achieve Highly Accurate Positioning by Combining the Highly Accurate αSTEP With a Ball Screw
By integrating the hollow rotor and ball screw nut without using couplings or other connecting parts, the rigidity of the parts and the effect of backlash due to combining are reduced.
2 Types of Ball Screws for Drive
| Drive Ball Screw | Precision | Rolled |
|---|---|---|
| Repetitive Positioning Accuracy | ±0.003 mm | ±0.01 mm |
| Minimum Travel Amount | 0.001 mm | |
Achieve Large Transportable Mass and High-Speed Operation*
| Lead | 1 mm | 2.5 mm | |
|---|---|---|---|
| Transportable Mass | Horizontal | 4 kg | 4 kg |
| Vertical | 4 kg | 2 kg | |
| Maximum Speed | 40 mm/s | 100 mm/s | |
- *The specification values in the table are for the table type with frame size of 28 mm.
The shortest positioning time can be easily calculated
For applicable products of Oriental Motor's electric actuators, a support tool is available to calculate the reference positioning time according to the "model" and "operation conditions."
αSTEP AZ Series Drive Motor Equipped
- Features a built-in battery-free absolute encoder with no external sensors required for continuous monitoring of the motor position
- High reliability with closed loop control
- High efficiency technology reduces motor heat generation and saves energy
Allows Stable, Fine Feed
Equipped with αSTEP, which enables stable repetition of finely-detailed movements, 1 step at a time. Ideal for fine adjustment of cameras and lenses.
Smooth Low Speed Operation
The microstep drive and smooth drive function* reduce vibration at low speed and allow for smooth movement. Ideal for drive shafts that stably supply solution from a syringe.
- *The smooth drive function automatically microsteps based on the same traveling amount and traveling speed used in the full step mode, without changing the pulse input settings.
Contributes to Size and Weight Reductions of Equipment
The compact body with integrated αSTEP and ball screw can contribute to reducing equipment size and space saving.
The reduced weight at the end of the equipment is expected to increase design flexibility.
Any Combination of Types and Additional Functions is Possible.
Table Type
This product has high rigidity guide that can fix the load to the cylinder.
Directly installing the load is easy.
Rod Type
The compact shape without any guide allows direct integration into equipment.
This product can be used as a compact thrust shaft in the guide section of equipment for load transportation.
Products With Additional Functions Such as Ball Screw Covers and Mounting Plates are Available
With Ball Screw Cover
The product can be supplied with a ball screw cover for simple dustproofing.
With Mounting Plate
Products with mounting plates are available. 2 product lines are available: one for mounting from the back face using a flange, and the other for mounting from the top using a foot.
Reduces Startup Time
Compact Body Houses Entire Linear Motion Mechanism
As there is no need to make the parts in-house, the time required for "equipment design and parts selection" and "assembly and accurate mounting adjustment" can be reduced, leading to more efficient equipment start-up.
Parameters Required for Operation Already Set
Mechanical parameters such as lead and stroke are set by the ABZO Sensor at the time of shipment. After purchase, it can be set in "mm" units, contributing to reduced equipment start-up time.
No Home Sensor Required
Since position information is managed mechanically by the ABZO sensor, external sensors such as a home sensor and limit sensor are not required. Regular maintenance issues when using external sensors can also be avoided.
Advantages of AZ Series Equipped
Encoder assoluto senza batteria
È dotato di un piccolo encoder assoluto meccanico senza batteria (sensore ABZO). In questo modo è possibile migliorare la produttività e ridurre i costi.
- Sensore meccanico
Conserva le informazioni sul posizionamento anche in assenza di alimentazione - Encoder assoluto multigiro
Il rilevamento della posizione assoluta è possibile con ±900 (1.800) giri dell'albero motore dalla posizione iniziale
Non è richiesto alcun sensore esterno
Poiché si tratta di un sistema assoluto, non sono richiesti sensori homing o sensori di limite.
Vantaggi
- Miglioramento dell’homing ad alta velocità e della precisione di homing
- Costi ridotti
- Cablaggio semplice
- Non influenzato dal malfunzionamento del sensore esterno
Senza batteria
I sensori meccanici non richiedono batterie.
Le informazioni di posizionamento sono gestite meccanicamente dal sensore ABZO.
Vantaggi
- Non è necessario sostituire le batterie
- Possibilità illimitate di installazione dei driver
- Adatto alla spedizione all'estero
Semplificazione del programma principale tramite la funzione sequenza
La Serie AZ è dotata di una vasta gamma di funzioni di sequenza, come impostazioni del timer per operazioni collegate e durante le operazioni, istruzioni condizionali e operazioni in loop (esclusi alcuni modelli).
Può essere configurata utilizzando il software di supporto MEXE02, che semplifica il programma di sequenza del sistema host.
- Valore di configurazione dei dati di posizionamento (max. 256)
- Segnali di I/O fisici per uso generale (Ingresso 10, Uscita 6)
- Segnali di I/O remoti (Ingresso 16, Uscita 16)
AZ Series-Equipped Product Line
Since the motors installed are the same, the operating and maintenance methods are the same.
Electric Actuators (AZ Series equipped)
| Electric Linear Slides | Electric Cylinders | Compact Electric Cylinders | Rack-and-Pinion System | Electric Grippers | Hollow Rotary Actuators |
|---|---|---|---|---|---|
| EZS Series | EAC Series | DR Series DRS2 Series |
L Series | EH Series | DGII Series |
- The power supply input of the installed motor differs between Series. Please refer to each series page for the detailed product line.
Driver Features and Product Line
Drivers That Can be Selected to Match the Host Controller
The lineup is available for a variety of controls, systems, and interfaces.
| Driver Type | Compatible Interfaces | Single Axis Driver | |
|---|---|---|---|
| DC Input | |||
 |
|||
| Network Compatible | Drivers are controlled directly from a host control device through industrial network | EtherCAT | ○ |
| EtherNet/IP™ | ○ | ||
| PROFINET | ○ | ||
| Built-in Controller | Operation data is built into the driver. Controllable by Modbus (RTU) and I/O. | Modbus (RTU) I/O |
○ |
| Pulse Input with RS-485 Communication | Controlled by pulse signal. Motor status information can be monitored via Modbus (RTU). | Pulse input Modbus (RTU) |
○ |
| Pulse Input | Controlled by pulse signal | Pulse input | ○ |
- DC input mini drivers and multi-axis driver lineups are also available.
Applications and Convenient Usage
Applications
Table Type/Rod Type
Focusing of a CCD Camera
X-Y Stage Drive
(Automation of micrometer head)
Mounting Example
Table Type/Rod Type
There are 2 types of mounting methods: front mounting and side mounting.
Products with mounting plates (flange* and foot*) can be mounted from the back face using the flange or from the top using the foot.
- *Materials: Aluminum, Surface Treatment: None
| Front Mounting | Side Mounting | Installation With Flange (Except rod type) |
Mounting With Foot (Except DR20 rod type) |
|---|---|---|---|
 |
 |
 |
 |
- *The figure shows the table type.
Efficient Push-Motion Operation
Flexible Push Force and Timing
The various types of electric actuator can easily transition to push-motion operation after positioning operations are completed. In addition, push force and timing are flexible.
Note
Please refrain from performing push-motion operation with the DR Series 1 mm lead compact electric cylinders. Because the TLC signal will be output prior to completion of push-motion operation, it may not be completed normally.
Push-motion operation can be used with other electric linear slides, compact electric cylinders, and electric grippers.
Advantages
- You can set the push force and push timing to an operation data number, and then select the data number to change the settings.
- There are different ways to change the pressing phases, such as dropping the force so that the position does not shift, slowly increasing the force, or rapidly increasing the force.
- *The illustrations above are reference diagrams for the DRS2 Series of compact electric cylinders.
Can be Used With Low Speed Push-Motion
The motor can approach the load at high speed. The motor decelerates just before hitting the surface at low speed.
Advantages
- Since the pressing impact is minimal, a mechanism for shock absorption is not required.
- The motor can approach at high speed just before reaching the surface, thus reducing the takt time.
- *The illustrations above are reference diagrams for the DRS2 Series of compact electric cylinders.
Pulse Input Type Can Also be Used for Push-Motion Operation
When T-MODE input is set, push-motion operation is possible, without the overload alarm for the pulse input type being generated.
This is useful for push-motion operation while using pulse input control.
Can Detect Forgotten Load Insertion Without Any External Sensors
The presence or absence of load can be checked by the output signals (TLC output and IN-POS output) from the driver.
-
- IN-POS Output
- Output signal sent when positioning operations are completed.
-
- TLC Output
- Output signal sent when output torque reaches the torque limiting value setting during push-motion operation.
- *The illustrations above are reference diagrams for the DRS2 Series of compact electric cylinders.
Various Operating Patterns and I/O Signals (Applicable to built-in controller type drivers, etc.)
With this type, the operation data is set in the driver, then selected and executed from the host system. In addition, operation data can be combined or shifted to another operation data triggered by an internal or external ON or OFF signal.
Support Software, Monitor Functions
Facile gestione da PC con software di supporto MEXE02
Utilizzando il software di supporto MEXE02, è possibile impostare e modificare i dati di funzionamento e vari parametri, nonché gestire e monitorare varie condizioni.
Fare clic qui per scaricare il software di supporto
Supporto completo dall'avvio alla manutenzione con una varietà di funzioni
-
Avvio e diagnostica
Vengono fornite funzioni utili per il controllo del cablaggio e il funzionamento del test.
- Impostazione e salvataggio dei dati di funzionamento
- Monitoraggio I/O
- Teaching, funzionamento da remoto
-
Regolazione
Di seguito sono riportate le funzioni che possono aiutare a regolare il funzionamento del motore dopo l'installazione dell'apparecchiatura.
- Oscilloscopio
-
Diagnosi e manutenzione
Le funzioni di diagnosi e manutenzione sono disponibili per risolvere i problemi e per intervenire dopo l'avvio del funzionamento.
- Monitor dell’allarme
- Monitor informazioni dell’unità
- Monitor dello stato
-
Schermo di configurazione dei dati di funzionamento/parametri -
Oscilloscopio
Fare clic qui per i dettagli sulle funzioni del software di supporto
Related Products
Driver multiasse Serie AZ per Alimentazione DC
È possibile collegare i motori con alimentazione DC della Serie AZ Oriental Motor e gli attuatori elettrici dotati di tali motori.
-
Modello a 2 assi -
Modello a 3 assi -
Modello a 4 assi
Mini driver Serie AZ per Alimentazione DC
Si tratta di un mini driver progettato per essere più compatto e leggero dei driver standard. Compatibile anche con l'alimentazione a batteria, è quindi utilizzabile per una gamma di applicazioni ancora più ampia rispetto al passato.
Narrow down Products
