Electric Actuator DC Input Driver Type Introduction

Network Compatible Driver

It can be controlled directly from the network. A single communication cable is used to connect the driver to the host control device, thus saving wiring.

Network Compatible Driver
  • The driver uses DC input.

Built-In Controller Type

With this type, operation data is set in the driver, then selected and executed from the host system. Host system connection and control are performed with any of the following: I/O, Modbus (RTU)/RS-485 communication, or an industrial network. Using the network converter (sold separately), CC-Link, MECHATROLINK, and EtherCAT communications are possible.

Built-In Controller Type
  • The driver uses DC input.

Pulse Input Type With RS-485 Communication

This type executes operations by inputting pulses into the driver. The motor is controlled from a positioning module (pulse generator) provided by the customer. RS-485 communication can be used to monitor status information for the motor (position, speed, torque, alarms, temperature, etc.).

Pulse Input Type With RS-485 Communication
  • The driver uses DC input.

Pulse Input Type

This type executes operations by inputting pulses into the driver. The motor is controlled from a positioning module (pulse generator) provided by the customer. The support software (MEXE02) can be used to check the alarm history and monitor status information.

Pulse Input Type
  • The driver uses DC input.