Encoders Rotary Encoder

Features

Small, Thin, and Lightweight Incremental Encoder

Outer diameter φ30mm, depth 22mm, mass 33g (round shaft type) / 38g (hollow shaft type), small, thin, and lightweight, allowing installation in tight spaces.

Despite its small size with an outer diameter of φ30 mm, the product line offers resolutions ranging from 100 P/R to a maximum of 4000 P/R

14 types are available, including resolutions that are easy to combine with stepper motors and those suitable for the desired step angle.

A wide variety of output circuit types available

Three types of output circuit are available: line driver output, voltage output, and open-collector output.

Can be used in high temperature environments up to 85 °C

The Actual Position, Speed, and Rotation Direction of the Mechanism Can Be Detected

By attaching a rotary encoder to the mechanism, a predictive maintenance system for the mechanism can be established.

• Application Example
  In belt and pulley mechanisms, it is possible to detect the difference in rotation between the motor and mechanism due to belt deflection or breakage

Easy Alignment of Mechanical Home and Z-phase Signal

The Z-phase signal is output at the position where the shaft milling cut section (round shaft type) or the fixing screw section (hollow shaft type) is rotated 180° from the encoder connector. Use this as a guide when adjusting the positional relationship be tween the mechanical home and the Z-phase signal.

Can Be Installed in Accordance With the Mechanism

Product Line

Round Shaft Type

Hollow Shaft Type

Rotary Encoder Product Code

Encoder Connection Cables(sold separately)

Encoder connection cable that can be connected to a rotary encoder via a connector.

	Product Name	Applicable Encoder	Length (m)
	LCE05A-006	Voltage Output, Open-Collector Output	0.6
	LCE08A-006	Line Driver Output

Flexible, shielded connection cable for encoder.

	Product Name	Applicable Encoder	Length (m)
	CC010E1R	Line driver output/Voltage output/Open-collector output	1
	CC020E1R		2
	CC030E1R		3

Mounting Bracket for Round Shaft Type (Sold separately)

Mounting bracket to be assembled to round shaft type.

		Product Name
	Example of assembly	PEF2

• Application Example

A round shaft type rotary encoder can be mounted from the rear using the mounting bracket.