Cables: For BLV Series R Type
[1] Connection Cable
For 60 W Type *Required
Be sure to purchase this product for connection between the motor and driver.
The maximum extension distance is 3.0 m.
| Length (m) | Connection Cable | Flexible Connection Cable | |
|---|---|---|---|
| Product Name | Product Name | ||
 |
0.3 | CCM003B1ABF | - |
| 1 | CCM010B1ABF | CCM010B1ABR | |
| 2 | CCM020B1ABF | CCM020B1ABR | |
| 3 | CCM030B1ABF | CCM030B1ABR |
For 100 W, 200 W, 400 W Type
The motor cable can be connected directly to the driver. Use a connection cable for extension.
Maximum extension distance is 3.5 m including the 0.5 m motor cable.
| Length (m) | Connection Cable | Flexible Connection Cable | |
|---|---|---|---|
| Product Name | Product Name | ||
|
|
1 | CCM010B1AAF | CCM010B1AAR |
| 2 | CCM020B1AAF | CCM020B1AAR | |
| 3 | CCM030B1AAF | CCM030B1AAR |
[2] Power Supply Cable
Cable Note When Wiring Flexible Cable
Do not bend the cable at the connector. Stress applied to the connectors and terminals causes poor contact and disconnection.
How to Fix the Cable
Fix the connector part in 2 places to prevent it from moving.
Wiring Length and Bending Radius of the Cable
Wiring should be installed at an appropriate length, so that cables are not pulled during movement.
In addition, the bending radius (R) should be 6 times the cable diameter min.
Interference of the Cable
Wire the cables in the cable holder without bringing them into contact with each other. This will add stress to the cable, and cause it to break prematurely. Please check note on cable holders carefully before use.
Cable Kinks
◇Please wire without kinks in the cable. Kinking in a twisted state can cause premature disconnection. After wiring, confirm that there are no kinks in the cable, using the print on the cable surface as a reference.