Q.How do I connect the network converter to the driver? (Applicable Products: NETC01-CC, NETC02-CC, NETC01-M2, NETC01-M3, NETC01-ECT)
Use the RS-485 communication cable included with the network converter, or a commercially available LAN cable to connect.
One cable of 250 mm and another of 100 mm for RS-485 communication cable are attached.
If this length is not sufficient, please consider using a commercially available LAN cable.
-
CC002-RS4 usage example
Used for AC input type drivers and other devices that cannot be installed in close proximity.
From left to right, the image shows NETC02-CC, AZD-AD, AZD-AD, and AZD-KD.
-
CC001-RS4 usage example
Used for DC input type drivers and other devices that can be installed in close proximity.
From left to right, the image shows NETC02-CC, AZD-KD, and AZD-KD.
- *The second and subsequent cables in each usage example are accessary cables sold separately.
If you are using a commercial LAN cable, please refer to the following FAQ.
Q442. Can I use a commercial LAN cable to connect the network converter to the driver?
Product Category: Controller and Network Compatible Products
Model and Series: General
Description: Wiring Methods, Installation and Mounting Methods, Included Items and Accessories
FAQ No.: 441
Email to Technical Support
After opening the email, we will check the contents and contact you. Please note that depending on the nature of your enquiry, we may contact you by phone.