Q.What is the function of electronic gear and how are they used?

A.

The electronic gear is a function that adjusts the travel amount per step (per pulse).
For example, a product with a factory setting resolution of 0.36˚/step can be changed to 0.1˚/step, 1˚/step, and so on.

Below is an example of a electronic gear setting when using a rotating mechanism and a ball screw mechanism.

For Rotating Mechanisms
I want to use a geared motor and rotate it at 0.01˚/step.

  • Product
    AR Series Built-in Controller Type
  • Motor Resolution at Factory Setting
    1000 [P/R]
  • Travel Amount per Revolution
    360 [°]
  • Minimum Travel Amount
    0.01 [°]
  • Gear Ratio
    10 (A geared motor with a gear ratio of 10 is used)

[Calculating the setting value of electronic gears]

\(\begin{align}\text{Mechanical Resolution} &=\text{Motor Resolution at Factory Setting} \times \frac{\text{Electronic gear B}}{ \text{Electronic gear A}}\\[5pt] &=\frac{\text{Travel Amount per Revolution}}{ \text{Minimum travel amount}} \times \text{Gear Ratio} \end{align}\)
In this example,　　\(\begin{align} 1000[\mathrm{P} / \mathrm{R}] \times \frac{\text{Electronic gear B}}{ \text{Electronic gear A}}=\frac{360^{\circ}}{0.01^{\circ}} \times \frac{1}{10} \end{align}\)
therefore　　　　\(\begin{align} \frac{\text{Electronic gear B}}{ \text{Electronic gear A}}=\frac{18}{5}\end{align}\)

Based on the calculation results, it is possible to move at 0.01˚/step by setting electronic gear A = 5 and electronic gear B = 18.

For ball screw mechanism
I want to use a ball screw to move it at 0.01 mm/step.

  • Product used
    AR Series Built-in Controller Type
  • Motor Resolution at Factory Setting
    1000 [P/R]
  • Ball screw lead
    12 [mm]
  • Minimum Travel Amount
    0.01 [mm]
  • Gear Ratio
    1 (There shall be no speed reduction mechanism between the motor and ball screw)

[Calculating the setting value of electronic gears]

\(\begin{align}\text{Mechanical Resolution} &=\text{Motor Resolution at Factory Setting} \times \frac{\text{Electronic gear B}}{ \text{Electronic gear A}}\\[5pt] &=\frac{\text{Ball screw lead}}{ \text{Minimum Travel Amount}} \times \text{Gear Ratio} \end{align}\)
In this example,　　\(\begin{align} 1000[\mathrm{P} / \mathrm{R}] \times \frac{\text{Electronic gear B}}{ \text{Electronic gear A}}=\frac{12\ \mathrm{mm}}{0.01\ \mathrm{mm}} \times 1 \end{align}\)
therefore　　　　\(\begin{align} \frac{\text{Electronic gear B}}{ \text{Electronic gear A}}=\frac{6}{5}\end{align}\)

Based on the calculation results, it is possible to move at 0.01 mm/step by setting electronic gear A = 5 and electronic gear B = 6.

The range of electronic gear settings differs from product to product, so please refer to the operating manual or user manual of each product for details.
We also provide a technical support tool that allows you to easily calculate electronic gear settings on our website. Please take advantage of it as well.

Product Category: αSTEP, Stepper Motor , Servo Motor
Model and Series: General
Description: How to Use/Setting Method
FAQ No.: 265


Email to Technical Support

After opening the email, we will check the contents and contact you. Please note that depending on the nature of your enquiry, we may contact you by phone.


Call the Technical Support

Has your question been resolved?

If you have any other comments or requests, please enter them here.

  • *We will not be able to respond to the information you have entered.

FAQ